Check Valves

Pegler Valve

Bronze swing type check valve BS5154 PN25 Series B, metal disk

Bronze swing type check valve BS5154 PN25 Series B, metal disk

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/2"1060A1105022050546135£44.22
3/4"1060A1105022050546142£54.13
1"1060A155022050546159£71.44
1.1/4"1060A125022050546166£103.46
1.1/2"1060A125022050546173£146.83
2"1060A105022050545640£223.24
2.1/2"1060A105022050545657£512.61
3"1060A105022050545664£724.80
4"1060A105022050545671£2198.97
1/2"1060A AT1105022050566478£45.48
3/4"1060A AT1105022050566485£60.14
1"1060A AT155022050566508£83.28
1.1/4"1060A AT125022050566751£132.97
1.1/2"1060A AT125022050566768£163.76
2"1060A AT105022050566775£264.94
2.1/2"1060A AT105022050566782£512.61
3"1060A AT105022050566799£724.80
1/2"1060A PT1105022050546180£45.48
3/4"1060A PT1105022050546197£60.14
1"1060A PT155022050546203£83.28
1.1/4"1060A PT205013866013935£132.97
1.1/2"1060A PT125022050546210£163.76
2"1060A PT185022050545688£264.94
2.1/21060A PT105022050576187£512.61
31060A PT105022050576194£724.80
41060A PT105022050576279£2198.97
CodeDescriptionAB
1220071/2" 1060A GM SWING CHECK VALVE62450.38
1220083/4" 1060A GM SWING CHECK VALVE76550.58
1220091" 1060A GM SWING CHECK VALVE83600.86
1220101.1/4" 1060A GM SWING CHECK VALVE94651.26
1220111.1/2" 1060A GM SWING CHECK VALVE105751.66
1220122" 1060A GM SWING CHECK VALVE125902.66
1220132.1/2" 1060A GM SWING CHECK VALVE1611123.44
1220143" 1060A GM SWING CHECK VALVE1721324.52
1220154" 1060A GM SWING CHECK VALVE2221308.38
1220271/2" 1060A AT GM SWING CHECK VALVE62450.38
1220283/4" 1060A AT GM SWING CHECK VALVE76550.58
1220291" 1060A AT GM SWING CHECK VALVE83600.86
1220301.1/4" 1060A AT GM SWING CHECK VALVE94651.26
1220311.1/2" 1060A AT GM SWING CHECK VALVE105751.66
1220322" 1060A AT GM SWING CHECK VALVE125902.66
1220332.1/2" 1060A AT GM SWING CHECK VALVE1611123.44
1220343" 1060A AT GM SWING CHECK VALVE1721324.52
1220471/2" 1060A PT GM SWING CHECK VALVE62450.38
1220483/4" 1060A PT GM SWING CHECK VALVE76550.58
1220491" 1060A PT GM SWING CHECK VALVE83600.86
1220501.1/4" 1060A PT GM SWING CHECK VALVE94651.26
1220511.1/2" 1060A PT GM SWING CHECK VALVE105751.66
1220522" 1060A PT GM SWING CHECK VALVE125902.66
1220532.1/2 1060A PT GM SWING CHECK VALVE1481103.52
1220543 1060A PT GM SWING CHECK VALVE1751254.48
1220554 1060A PT GM SWING CHECK VALVE2221308.38
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1/2"1060A1220070.400.404.07
3/4"1060A1220080.610.616.21
1"1060A1220090.870.874.43
1.1/4"1060A1220101.281.282.61
1.1/2"1060A1220111.641.643.36
2"1060A1220122.552.650.00
2.1/2"1060A1220133.523.620.00
3"1060A1220144.484.820.00
4"1060A1220158.388.390.00
1/2"1060A AT1220270.390.394.06
3/4"1060A AT1220280.590.596.13
1"1060A AT1220290.850.854.38
1.1/4"1060A AT1220301.301.302.67
1.1/2"1060A AT1220311.641.643.39
2"1060A AT1220322.722.780.00
2.1/2"1060A AT1220333.523.860.00
3"1060A AT1220344.484.400.00
1/2"1060A PT1220470.400.404.05
3/4"1060A PT1220480.600.606.14
1"1060A PT1220490.850.854.46
1.1/4"1060A PT1220501.312.760.00
1.1/2"1060A PT1220511.641.643.35
2"1060A PT1220522.652.7222.32
2.1/21060A PT1220533.523.730.00
31060A PT1220544.484.820.00
41060A PT1220558.388.390.00
SizePattern No.CodeFlow l/sKv m3/hCv - US GPM
1/2"1060A1220070.04
0.10
0.20
0.40
1.80
3.70
5.10
5.70
-
3/4"1060A1220080.04
0.10
0.40
1.00
2.70
5.50
13.60
15.30
-
1"1060A1220090.01
0.20
0.30
1.00
7.70
13.90
18.40
25.30
-
1.1/4"1060A1220100.20
0.30
0.40
1.00
15.00
26.60
25.30
32.60
-
1.1/2"1060A1220110.40
0.60
0.80
3.00
30.30
40.20
48.50
54.40
-
2"1060A1220120.60
0.80
1.50
4.00
42.00
54.00
86.20
98.00
-
2.1/2"1060A1220131.50
3.00
4.00
97.60
135.30
156.00
-
3"1060A1220142.00
3.00
5.00
144.60
168.40
229.00
-
4"1060A122015   
1/2"1060A AT1220270.04
0.10
0.20
0.40
1.80
3.70
5.10
5.70
2.10
4.30
5.90
6.50
3/4"1060A AT1220280.04
0.10
0.40
1.00
2.70
5.50
13.60
15.30
3.10
6.30
15.60
17.60
1"1060A AT1220290.01
0.20
0.30
1.00
7.70
13.90
18.40
8.80
16.00
21.10
1.1/4"1060A AT1220300.20
0.30
0.40
1.00
15.00
26.60
25.30
32.60
17.2
23.7
29.1
37.5
1.1/2"1060A AT1220310.40
0.60
0.80
3.00
30.30
40.20
48.50
54.40
34.80
46.20
55.70
62.50
2"1060A AT1220320.60
0.80
1.50
4.00
42.00
54.00
86.20
98.00
48.30
62.00
99.00
112.60
2.1/2"1060A AT1220331.50
3.00
4.00
97.60
135.30
156.00
-
3"1060A AT1220342.00
3.00
5.00
144.60
168.40
229.00
-
1/2"1060A PT1220470.04
0.10
0.20
0.40
1.80
3.70
5.10
5.70
-
3/4"1060A PT1220480.04
0.10
0.40
1.00
2.70
5.50
13.60
15.30
-
1"1060A PT1220490.01
0.20
0.30
1.00
7.70
13.90
18.40
25.30
-
1.1/4"1060A PT1220500.20
0.30
0.40
1.00
15.00
20.60
25.30
32.60
-
1.1/2"1060A PT1220510.40
0.60
0.80
3.00
30.30
40.20
48.50
54.40
-
2"1060A PT1220520.60
0.80
1.50
4.00
42.00
54.00
86.20
98.00
-
2.1/21060A PT122053   
31060A PT122054   
41060A PT122055   
Pegler Yorkshire reserve the right to change specifications

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
1060A Swing Check Valve0.5 -1.0 bar25.0 bar at temperatures up to 100oC10.5 bar at temperatures up to 186oC

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
1/2"1060A122007SEP
3/4"1060A122008SEP
1"1060A122009SEP
1.1/4"1060A122010SEP
1.1/2"1060A122011SEP
2"1060A122012SEP
2.1/2"1060A122013SEP
3"1060A122014SEP
4"1060A122015SEP
1/2"1060A AT122027-
3/4"1060A AT122028-
1"1060A AT122029-
1.1/4"1060A AT122030-
1.1/2"1060A AT122031-
2"1060A AT122032-
2.1/2"1060A AT122033-
3"1060A AT122034-
1/2"1060A PT122047-
3/4"1060A PT122048-
1"1060A PT122049-
1.1/4"1060A PT122050-
1.1/2"1060A PT122051-
2"1060A PT122052-
2.1/21060A PT122053-
31060A PT122054-
41060A PT122055-
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
BodyGunmetal
CapForged Brass (1/4" to 2") Gunmetal (2.1/2" to 4")
ValveGunmetal
SwingerBrass Bar (1/4" to 1") Gunmetal (1.1/4" to 4")
Swinger PinBrass Bar
Swinger Pin Cap (sizes 2 1/2" to 4" only)Brass Bar
NutBrass Bar
Rating DiscTinned Iron Sheet

You must sign in to your My PY account to access specification clauses

loading...
Remember me
 

Register for a My PY account

SizeCodeFlange Diameter (mm)Pitch Circle Diameter (mm)No of BoltsBolt Diameter (mm)Hole Diameter (mm)Raised Face Diameter (mm)Raised Face Height (mm)Thickness of Flange (mm)
Pegler Yorkshire reserve the right to change specifications
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
yesyesyesyesnononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Flange Data

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries