Check Valves

Pegler Valve

Forged brass foot valve

Forged brass foot valve

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/2"1064 PT1005013866036422£17.01
3/4"1064 PT1005013866036439£22.45
1"1064 PT1005013866036446£30.26
1.1/4"1064 PT605013866036453£49.93
1.1/2"1064 PT405013866036460£68.21
2"1064 PT205013866036477£103.46
2.1/2"1064 PT105022050547705£231.20
3"1064 PT105022050547712£365.05
4"1064 PT105022050547729£637.69
1/2"1064 AT1005022050228567£17.01
3/4"1064 AT1005022050228673£22.45
1"1064 AT1005022050228772£30.26
1.1/4"1064 AT605022050228888£49.93
1.1/2"1064 AT405022050228970£68.21
2"1064 AT205022050229038£103.46
CodeDescriptionAB
1242711/2" 1064 PT BRASS FOOT/FILTER VALVE83.532
1242723/4" 1064 PT BRASS FOOT/FILTER VALVE94.537
1242731" 1064 PT BRASS FOOT/FILTER VALVE105.545
1242741 1/4" 1064 PT BRASS FOOT/FILTER VALVE11855.5
1242751 1/2" 1064 PT BRASS FOOT/FILTER VALVE13567
1242762" 1064 PT BRASS FOOT/FILTER VALVE15778.5
1242772 1/2" 1064 PT BRASS FOOT/FILTER VALVE17998
1242783" 1064 PT BRASS FOOT/FILTER VALVE200.5112
1242794" 1064 PT BRASS FOOT/FILTER VALVE218138
1242911/2" 1064 AT BRASS FOOT/FILTER VALVE8334
1242923/4" 1064 AT BRASS FOOT/FILTER VALVE9641.5
1242931" 1064 AT BRASS FOOT/FILTER VALVE10747
1242941.1/4" 1064 AT BRASS FOOT/FILTER12058.5
1242951.1/2" 1064 AT BRASS FOOT/FILTER VALVE13669
1242962" 1064 AT BRASS FOOT/FILTER VALVE15984
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
1/2"1064 PT1242710.131.360.00
3/4"1064 PT1242720.181.880.00
1"1064 PT1242730.232.260.00
1.1/4"1064 PT1242740.382.320.00
1.1/2"1064 PT1242750.572.380.00
2"1064 PT1242760.731.560.00
2.1/2"1064 PT1242771.381.420.00
3"1064 PT1242781.952.050.00
4"1064 PT1242792.993.100.00
1/2"1064 AT1242910.131.400.00
3/4"1064 AT1242920.191.920.00
1"1064 AT1242930.022.380.00
1.1/4"1064 AT1242940.382.410.00
1.1/2"1064 AT1242950.552.200.00
2"1064 AT1242960.781.560.00

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
1064 Foot Valve0.002 - 0.04 bar8.0 bar at temperatures up to 90oCNot Suitable for Maximum Hot Working Pressure

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.

SizePattern No.CodePED Categorisation
1/2"1064 PT124271-
3/4"1064 PT124272-
1"1064 PT124273-
1.1/4"1064 PT124274-
1.1/2"1064 PT124275-
2"1064 PT124276-
2.1/2"1064 PT124277-
3"1064 PT124278-
4"1064 PT124279-
1/2"1064 AT124291-
3/4"1064 AT124292-
1"1064 AT124293-
1.1/4"1064 AT124294-
1.1/2"1064 AT124295-
2"1064 AT124296-
Pegler Yorkshire reserve the right to change specifications
ComponentMaterial
PinABS
Pin WasherABS
BodyBrass
Sealing WasherEPDM Rubber
SpringStainless Steel 18/8
FilterStainless Steel 18/8
Filter/Body ConnectionABS

Please select the correct size

 

SizeCodeFlange Diameter (mm)Pitch Circle Diameter (mm)No of BoltsBolt Diameter (mm)Hole Diameter (mm)Raised Face Diameter (mm)Raised Face Height (mm)Thickness of Flange (mm)
Pegler Yorkshire reserve the right to change specifications
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Guarantee / Warranty

Pressure & Temperature

Care & Maintenance

Installation Instructions

Regulations

Material Specifications

Spares

Flange Data

Technical Suitability

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries