Carbon

VSH XPress

Straight male connector, press-fit x BSP taper male thread

Straight male connector, press-fit x BSP taper male thread

SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
15mm x 3/8" (A)SC3102008711985097443£11.24
15mm x 1/2" (A)SC3102008711985097450£11.24
18mm x 1/2" (A)SC3101608711985097467£11.62
18mm x 3/4" (A)SC3101008711985097474£13.47
22mm x 1/2"SC310708711985149814£13.47
22mm x 3/4"SC3101008711985097481£13.47
22mm x 1"SC310608711985149821£14.53
28mm x 3/4"SC310608711985163995£17.06
28mm x 1"SC310608711985097498£17.06
35mm x 1"SC310408711985281262£21.91
35mm x 1.1/4"SC35408711985097504£21.91
42mm x 1.1/2"SC34248711985097511£24.44
54mm x 2"SC34128711985097528£37.90
66.7mm x 2.1/2" (E)SC3288711985292183£152.17
76.1mm x 2.1/2" (D) (E)SC3208711985258196£263.33
88.9mm x 3" (D) (E)SC3208711985258202£358.35

(D) Not cULus Approved

(E) Not LPCB or FM Approved

CodeDescriptionl1d1D1es1z1l2z2slw2sks2DN1DN2
2022715mm x 3/8" SC320152320015152428DN123/8" (DN10)
2022815mm x 1/2" SC320152320019192428DN121/2" (DN15)
2022918mm x 1/2" SC320182720019192731DN151/2" (DN15)
2023018mm x 3/4" SC320182720020202731DN153/4" (DN20)
2024222mm x 1/2 SC321223221022223237DN201/2" (DN15)
2023122mm x 3/4" SC321223221023233237DN203/4" (DN20)
2024322mm x 1 SC321223221029293439DN201" (DN25)
2023628mm x 3/4" SC323283823023233844DN253/4" (DN20)
2023228mm x 1" SC323283823025254147DN251" (DN25)
2056735mm x 1 SC3           
2023335mm x 1 1/4" SC326354526029294653DN321 1/4" (DN32)
2023442mm x 1 1/2" SC330425430029295664DN401 1/2" (DN40)
2023554mm x 2" SC335546535034347081DN502" (DN50)
2066466.7mm x 2 1/2" SC350678350040408598DN652 1/2" (DN65)
2071376.1mm x 2 1/2 SC355769555064648092DN652 1/2" (DN65)
2071488.9mm x 3 SC36389110630694695110DN803" (DN80)
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
15mm x 3/8" (A)SC3202270.040.377.52
15mm x 1/2" (A)SC3202280.040.499.33
18mm x 1/2" (A)SC3202290.050.508.15
18mm x 3/4" (A)SC3202300.070.676.80
22mm x 1/2"SC3202420.070.745.18
22mm x 3/4"SC3202310.080.798.10
22mm x 1"SC3202430.100.955.70
28mm x 3/4"SC3202360.111.056.45
28mm x 1"SC3202320.121.207.40
35mm x 1"SC3205670.161.616.44
35mm x 1.1/4"SC3202330.200.977.79
42mm x 1.1/2"SC3202340.230.925.70
54mm x 2"SC3202350.331.334.10
66.7mm x 2.1/2" (E)SC3206640.551.285.29
76.1mm x 2.1/2" (D) (E)SC3207130.651.350.00
88.9mm x 3" (D) (E)SC3207140.881.760.00

(D) Not cULus Approved

(E) Not LPCB or FM Approved

Pegler XPress Carbon fittings Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler and the final purchaser of the product. Xpress Carbon fittings are guaranteed for 5 years when installed along with other manufacturers’ tubes conforming to the specified standard. Where pipelines are constructed exclusively from Xpress Carbon fittings and tubes, the resulting installations will be deemed Xpress Carbon Systems and as such qualify for a 10 year guarantee.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

SizePattern No.CodeBV XPress Stainless Steel LPCB XPress
15mm x 3/8" (A)SC320227approved by BV XPress Stainless Steel not approved by LPCB XPress
15mm x 1/2" (A)SC320228approved by BV XPress Stainless Steel not approved by LPCB XPress
18mm x 1/2" (A)SC320229approved by BV XPress Stainless Steel not approved by LPCB XPress
18mm x 3/4" (A)SC320230approved by BV XPress Stainless Steel not approved by LPCB XPress
22mm x 1/2"SC320242approved by BV XPress Stainless Steel approved by LPCB XPress
22mm x 3/4"SC320231approved by BV XPress Stainless Steel approved by LPCB XPress
22mm x 1"SC320243approved by BV XPress Stainless Steel approved by LPCB XPress
28mm x 3/4"SC320236approved by BV XPress Stainless Steel approved by LPCB XPress
28mm x 1"SC320232approved by BV XPress Stainless Steel approved by LPCB XPress
35mm x 1"SC320567approved by BV XPress Stainless Steel approved by LPCB XPress
35mm x 1.1/4"SC320233approved by BV XPress Stainless Steel approved by LPCB XPress
42mm x 1.1/2"SC320234approved by BV XPress Stainless Steel approved by LPCB XPress
54mm x 2"SC320235approved by BV XPress Stainless Steel approved by LPCB XPress
66.7mm x 2.1/2" (E)SC320664approved by BV XPress Stainless Steel not approved by LPCB XPress
76.1mm x 2.1/2" (D) (E)SC320713approved by BV XPress Stainless Steel not approved by LPCB XPress
88.9mm x 3" (D) (E)SC320714approved by BV XPress Stainless Steel not approved by LPCB XPress
XPress FittingTube/pipe used withMin temperature and pressureMax temperature and pressure
XPress CarbonCarbon Steel-20˚C at 16bar110˚C at 16bar
XPress CarbonPlastic coated Carbon Steel-20˚C at 16bar110˚C at 16bar

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

You must sign in to your My PY account to access specification clauses

loading...
Remember me
 

Register for a My PY account

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries