Pegler Yorkshire Logo

Gunmetal lockshield draincock type A to BS 2879/2, male taper thread to BS 21

833 GMLS Draincock

Gunmetal lockshield draincock type A to BS 2879/2, male taper thread to BS 21

Key Features

  • WRAS approved
SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
1/2"833GM LS2005013866017322£40.77

833 GMLS Draincock

Gunmetal lockshield draincock type A to BS 2879/2, male taper thread to BS 21 dimensions
CodeDescriptionAB Kg
5420371/2" 833GMLS GUNMETAL TYPE A DRAINCOCK LS590
Pegler Yorkshire reserve the right to change specifications

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

DescriptionMinimum Operating
Pressure (bar)
Maximum Cold Working
Pressure (bar)
Maximum Hot
Working Pressure (bar)
833 GMLS Drain cockNo Minimum Operating Pressure20.0 bar at temperatures up to 120oCNot Suitable for Maximum Hot Working Pressure

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

ComponentMaterial
BodyGunmetal
HeadworkBrass
SpindleBrass
WasherEPDM
Spindle 'O' ringEPDM
Cap 'O' ringEPDM
LS coverBrass
SteamWaterOilAirGas InertGas Combustible†Gas Corrosive††Gas Oxygen
noyesyesnonononono
Pegler Yorkshire reserve the right to change specifications

Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.

833 GMLS Draincock

Gunmetal lockshield draincock type A to BS 2879/2, male taper thread to BS 21 spares diagram
1
Spare KeyDescriptionCodeBarcodeDate FromDate ToPrice (£) ex VAT
1VW25 VALVE WASHER817100501386605851601/01/190015/03/2023£0.00