Brass Draincock Type A to BS 2879/2 Male Taper thread to BS 21
| Code | Description | A | B Kg |
|---|---|---|---|
| 542007 | 1/2" 833 BRASS TYPE A DRAINCOCK | 55 | |
| 542008 | 3/4" 833 BRASS TYPE A DRAINCOCK | 63 |
Pegler Yorkshire reserve the right to change specifications
Valves and Fittings
Pegler Customcare 5 Year Guarantee - Terms and Conditions
Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.
This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.
The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.
This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.
Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.
Abusive behaviour and accidental damage to the product are not covered by this guarantee.
The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.
| Description | Minimum Operating Pressure (bar) | Maximum Cold Working Pressure (bar) | Maximum Hot Working Pressure (bar) |
|---|---|---|---|
| 833 Brass Drain cock | No Minimum Operating Pressure | 20.0 bar at temperatures up to 120oC | Not Suitable for Maximum Hot Working Pressure |
| Component | Material |
|---|---|
| Body | Brass |
| Headwork | Brass |
| Spindle | Brass |
| Washer | EPDM |
| Spindle O Ring | EPDM |
| Cap O Ring | EPDM |
| LS Cover | Brass |
| Steam | Water | Oil | Air | Gas Inert | Gas Combustible† | Gas Corrosive†† | Gas Oxygen | no | yes | yes | no | no | no | no | no |
|---|
Pegler Yorkshire reserve the right to change specifications
Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.
| 1 | ||||||
|---|---|---|---|---|---|---|
| Spare Key | Description | Code | Barcode | Date From | Date To | Price (£) ex VAT |
| 1 | VW25 VALVE WASHER | 817100 | 5013866058516 | 01/01/1900 | 15/03/2023 | £0.00 |
| 1 | VW17 VALVE WASHER | 811209 | 5013866054181 | 01/01/1900 | 08/03/2022 | £0.00 |