Bronze circulation valve. 50°C - 60°C adjustable range. Female x female
P605 Thermo circulation valve
P605 Thermo circulation valve
| Code | Description | A | B | C | D | E | Pressure & Temperature | |
|---|---|---|---|---|---|---|---|---|
| 16502 | 1/2" DN15 | 98 | 75 | 36 | 98 | 136 | 1 | fxf 50º-60ºC |
| 16503 | 3/4" DN20 | 125 | 75 | 45 | 125 | 147 | 1 | fxf 50º-60ºC |
| 16504 | 1" DN25 | 136 | 75 | 52 | 136 | 150 | 1 | fxf 50º-60ºC |
Pegler Yorkshire reserve the right to change specifications
Pegler 5 Year Guarantee - Terms and Conditions
Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.
The guarantee is subject to proof of purchase being supplied.
This guarantee does not affect any statutory rights the consumer may have in law.
The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.
This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.
The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.
This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.
Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.
Abusive behaviour and accidental damage to the product are not covered by this guarantee.
The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.
| Component | Material |
|---|---|
| Body | Gunmetal |
| Valve washer | EPM/PTFE |
| Adjuster | EPP, B2 |
| Thermal actuator | Gunmetal |
| Drain valve body | Gunmetal |
| Valve outlet | Gunmetal |
| Steam | Water | Oil | Air | Gas Inert | Gas Combustible† | Gas Corrosive†† | Gas Oxygen | no | yes | no | no | no | no | no | no |
|---|
Pegler Yorkshire reserve the right to change specifications
Gas application guide
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
Class 2. COMBUSTIBLE Hydrogen, methane, natural gas, town gas
Class 3. CORROSIVE Chlorine, sulphur dioxide Class 4. OXYGEN
Class 1. INERT Air, argon, carbon dioxide, helium, nitrogen
† Valves are suitable for British Gas Applications Family Gases 1, 2 and 3.
†† Suitable in applications where moisture is completely absent.