Sprint

VSH Tectite

Backplate elbow push-fit x BSP parallel female thread

Backplate elbow push-fit x BSP parallel female thread

Key Features

  • Non-Demountable
  • Up to 20 bar 30° - 10 bar 114°
  • Compatible with Copper
  • PB
  • PEX and Carbon Steel
  • Electrical continuity
  • Rodent resistant
  • Heat free installation
SizePattern No.Pack 1 QtyPack 2 QtyCodeBarcodePrice (£) each ex VAT
12mm x 1/2"TT15/TT471G51505022050180919£7.87
15mm x 1/2"TT15/TT471G51005022050112699£10.41
CodeDescriptiond1d2I1I2D1H2z1z2a
7554812mm x 1/2" TT15/TT471G121/2"27261844101435
7555015mm x 1/2" TT15/TT471G151/2"28252242171035
Pegler Yorkshire reserve the right to change specifications
This is an image that shows the dimensions of the product
SizePattern No.CodeIndividual Weight (kg)Pack 1 Weight (kg)Pack 2 Weight (kg)
12mm x 1/2"TT15/TT471G755480.070.3811.40
15mm x 1/2"TT15/TT471G755500.070.367.42

Pegler Tectite Sprint, Classic, Pro and 316 Guarantee - Terms and Conditions

Products are subject to a guarantee that is between Pegler and the final purchaser of the product. When correctly assembled with the stated tubes and pipe the length of guarantee is as follows:

25 Years Where Tectite Sprint, Tectite Classic, Tectite Pro and Tectite 316 fittings, Tectite-PEX barrier pipe and 316 System tube are installed in pipelines with products from other manufacturers, they are guaranteed for 25 years.

30 Years Where pipelines are constructed exclusively using Tectite fittings and recommended tubes, the resulting installations will be deemed Tectite Systems and qualify for a 30 year guarantee.

Qualifying systems are:

  • Tectite Sprint fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Classic fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite Pro fittings with Yorkex copper tube and/or Tectite-PEX pipe
  • Tectite 316 fittings and stainless steel 316 System tube.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects when installed in accordance with our instructions on specified tube materials and applications, and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the Guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble–free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to installation or consequential damages.

SizePattern No.CodeCARSO Tectite Sprint CSN TectiteDVGW Tectite SprintETA Classic and SprintKIWA TectiteNsf-Reg4-391750RISE Tectite SprintWRAS Tectite Sprint
12mm x 1/2"TT15/TT471G75548approved by CARSO Tectite Sprint approved by CSN Tectiteapproved by DVGW Tectite Sprintnot approved by ETA Classic and Sprintnot approved by KIWA Tectiteapproved by Nsf-Reg4-391750approved by RISE Tectite Sprintapproved by WRAS Tectite Sprint
15mm x 1/2"TT15/TT471G75550approved by CARSO Tectite Sprint approved by CSN Tectiteapproved by DVGW Tectite Sprintapproved by ETA Classic and Sprintapproved by KIWA Tectiteapproved by Nsf-Reg4-391750approved by RISE Tectite Sprintapproved by WRAS Tectite Sprint
Tectite FittingTube/pipe used withMin temperature  Max temperature
SprintCopper-24˚C* at 20bar30˚C at 20bar65˚C at 16bar114˚C at 10bar
SprintPB/PEX-20˚C* at 12bar20˚C at 12bar65˚C at 6bar92˚C at 3bar

Care
No regular aesthetic care is required for this product

Maintenance

No regular maintenance is required for this product.

For any further help please contact the Service Support Team on: 0800 1560050.

ComponentMaterial
BodyDZR Brass
'O' ringEPDM
Pipe guideGlass filed nylon 6
Grab ringStainless steel
Protection ringNylon

BIM

You must sign in to your My PY account to access BIM Links

loading...
Remember me
 

Register for a My PY account

Included in your data sheet will be: (Please uncheck the details not required)

General Information

Dimensions

Flow Data

Guarantee / Warranty

Approvals

Pressure & Temperature

Care & Maintenance

Installation Instructions

Material Specifications

© 2022 Pegler. All Rights Reserved. Site Map  Social Media
Registered office: Aalberts Integrated Piping Systems Ltd, St Catherine's Ave, Doncaster, S Yorkshire, DN4 8DF Company no : 00401507

Legal: Privacy Policy  Cookie Policy  Modern Slavery Statement   Equal Opportunities  Terms & Conditions

PY Blog RSS twitter facebook link in youtube
Aalberts Industries