Pegler Yorkshire -

DZR Brass ball valve with lever, full bore. XPress union x XPress end for copper, carbon/stainless steel

General Information

Size	Pattern No.	Pack 1 Qty	Pack 2 Qty	Code	Barcode	Price (£) each ex VAT
15mm	PSU550	1	10	245310	5022050567468	£38.03
18mm	PSU550	1	10	245311	5022050567482	£44.16
22mm	PSU550	1	5	245312	5022050567505	£58.65
28mm	PSU550	1	5	245313	5022050567529	£101.73
35mm	PSU550	1	4	245314	5022050567536	£138.47
42mm	PSU550	1	0	245315	5022050567543	£175.24
54mm	PSU550	1	0	245316	5022050567567	£269.86

Dimensions

Code	Description	A	B
245310	15mm PSU550	128	39	0.390
245311	18mm PSU550	128	39	0.394
245312	22mm PSU550	147	50	0.627
245313	28mm PSU550	160	55	0.958
245314	35mm PSU550	178	70	1.410
245315	42mm PSU550	195	78	1.910
245316	54mm PSU550	233	84	3.000

Pegler Yorkshire reserve the right to change specifications

Weights

Size	Pattern No.	Code	Individual Weight (kg)	Pack 1 Weight (kg)	Pack 2 Weight (kg)
15mm	PSU550	245310	0.39	0.39	4.03
18mm	PSU550	245311	0.39	0.39	4.06
22mm	PSU550	245312	0.64	0.64	3.27
28mm	PSU550	245313	0.96	0.96	4.87
35mm	PSU550	245314	1.38	1.40	5.82
42mm	PSU550	245315	1.91	2.02	0.00
54mm	PSU550	245316	3.11	3.22	0.00

Flow Rate

Size	Pattern No.	Code	Kv m3/h
15mm	PSU550	245310	17.00
18mm	PSU550	245311	17.00
22mm	PSU550	245312	41.00
28mm	PSU550	245313	70.00
35mm	PSU550	245314	121.00
42mm	PSU550	245315	200.00
54mm	PSU550	245316	292.00

Pegler Yorkshire reserve the right to change specifications

Valves and Fittings

Pegler Customcare 5 Year Guarantee - Terms and Conditions

Products are subject to a 5 year guarantee that is between Pegler and the final purchaser of the product.

The guarantee is subject to proof of purchase being supplied.

This guarantee does not affect any statutory rights the consumer may have in law.

The guarantee covers manufacturing or material defects and does not cover parts subject to normal wear and tear.

This product range has been designed for the use of homeowners, domestic and commercial applications and therefore the guarantee is subject to the product being properly selected for their intended service conditions.

The guarantee is not applicable where the product is fitted contrary to the conditions in the fitting instructions.

This is reinforced where valves are covered by the European Pressure Equipment Directive (PED97/23/EC) where Installation, Operating and Maintenance Instructions are supplied with each product and/or carton.

Provided it is installed correctly and receives adequate preventative maintenance it should give years of trouble –free service.

Abusive behaviour and accidental damage to the product are not covered by this guarantee.

The extent of this liability is limited to the cost of the replacement of the defective item and not to fitting or consequential damages.

Approvals

01 WRAS PB700 PB700T PB550 PB550T PB500 PB500T
[303.2k]

WRAS Press Fit Connectors
[98.6k]

WRc-NSF Press Fit
[40.6k]

Size	Pattern No.	Code
15mm	PSU550	245310
18mm	PSU550	245311
22mm	PSU550	245312
28mm	PSU550	245313
35mm	PSU550	245314
42mm	PSU550	245315
54mm	PSU550	245316

Pressure and Temperature

Description	Minimum Operating Pressure (bar)	Maximum Cold Working Pressure (bar)	Maximum Hot Working Pressure (bar)
PSU550 Ball valve	No minimum operating pressure.	16 bar up to 100oC	16 bar up to 100oC

Care and Maintenance

Care
No regular aesthetic care is required for this product

Maintenance
A regular maintenance program is the most efficient method of ensuring longer term operational efficiency of the selected valve. Such a program would need to include a risk assessment and a planned procedure of how the maintenance will be carried out. The possibility of operational limits being exceeded and the potential hazards ensuring must be considered as part of this assessment. This should be implemented to include visual checks on the valve’s condition and any development of unforeseen conditions, which could lead to failure. The correct fitting tools and equipment should be used for valve maintenance work. Separate means of draining the pipe work must be provided when carrying out any maintenance to valves. Where there may be any system debris this could be collected and /or filtered by installation of the appropriate protective device.

For further help please contact your local engineer.

If your product is under warranty please contact the Service Support Team on: 0800 1560050

Regulations

Regulations
THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING
The Pressure Equipment Regulations 1999 (SI 1999/2001) have now been introduced into United Kingdom law.

Valves with a maximum allowable pressure greater than 0.5 bar are covered by these new Regulations. Valves are categorised according to their maximum working pressure, size and rising level of hazard. The level of hazard varies according to the fluid being carried. Fluids are classified as Group 1, dangerous fluids or Group 2, all other fluids including steam. The Categories designated are SEP (sound engineering practice). Valves up to and including 25mm (1”) are designated SEP regardless of the fluid group. Those identified as having increased hazard are Categorised as, I, II, III or IV. All valves designated as SEP do not bear the CE mark nor require a Declaration of Conformity. Categories I, II, III or IV carry the CE mark and require a Declaration of Conformity. Valves classified from the piping chart would not be included in Category IV.